HardLine® provides superior high-level chemical resistance and protection against impact, abrasion and corrosion to deliver maximum protection and toughness, but at a tremendous value. It can be applied with either low or high-pressure equipment. 

HardLine has a Shore D 55 (ASTM D2240) hardness and a 50-80% (ASTM D412) elongation for the 2:1 ratio formulation and 125-175% (ASTM D412) elongation for the 1:1 ratio formulation which is designed for harder surface protection and has excellent chemically resistance. HardLine 21-55-120 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.

HardLine 21-55 Data Sheet

HardLine 21-55-120 Data Sheet

HardLine 11-55 Data Sheet


HardLine Formulation Properties

• High tensile strength and tear strength properties
• Very good abrasion and impact resistance
• Good chemical resistance
• Excellent corrosion resistance
• Good noise reduction


Typical HardLine Applications

  • Casting material for material handling eq. (chutes, hoppers, rollers)
  • General purpose lining applications
  • Truck beds requiring hard as nails protection
  • High impact applications
  • Material handling and flooring applications where products or vehicles side across a surface
  • Primary & Secondary Chemical Containment
  • Water and Wastewater Facilities
  • Sedimentation Basins
  • Pump Stations
  • Pipes - Outside
  • Light vehicular and foot traffic

HardLine: industry applications

Water - WasteWater
Water - WasteWater
Equipment Protection
Equipment Protection
Chemical ContainmentSecondary ContainmentPrimary Containment
Case Studies
Chemical ResistanceContainmentFlooringWaterproofingTransportationTanksSlip ResistancePhoto GalleryMining - AggregatesImpact - Abrasion


Featured Case Study

Oil & Gas - Containment