top

PipeLiner™

PipeLiner 5000 11-70 PW and PipeLiner 5100 PW are two-component, 1:1 ratio, rapid curing, elastomeric structural lining systems developed for high build applications of 30 – 500 mil cross sections. Both products can be sprayed in low temperatures, extremely humid conditions and at 350-400 mils thick, or almost 3/8 of an inch, in a single pass without stress cracking. 

Pipeliner 5000 and 5100 have passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 (2012) potable water standard and is Truesdail Laboratories listed. The polyurea/polyurethane systems are sprayed with high pressure plural component spray equipment and can also be sprayed with a cartridge gun for repairs. Thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.

Pipeliner 5000 11-70 PW Data Sheet

PipeLiner 5100 PW Data Sheet

_images/medium/0315144738surface_prep_of_cold_joint_Pipeliner 5000 - WA_Tacome WD 06 25 2013-2.jpg

Features and Benefits

  • • Complies with NSF/ANSI 61 Section 5 (2012) potable water standard
  • • Rapid cure times for quick return to service
  • • High build cross sections
  • truesdail certified• Can be sprayed in large pipelines: 9" diameter and greater
  • • Robust application window with ability to spray at low temperatures and high humidity
  • • High physical properties including tensile, tear, and compressive properties
  • • Excellent leveling properties
  • • Excellent impact resistance
  • • Excellent chemical resistance and corrosion resistance
  • • Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
  • • 100% solids, zero VOCs, no solvents

Typical Applications

Often used to repair aging and badly damaged gas, oil, sewer and drinking water pipelines

Creates self-supporting polyurea pipe with a pipe

Maintenance coating in immersion conditions

Concrete waterproofing

Geotextile fabric lining

Holding tanks

Containment areas

Ponds and reservoirs

Storage tanks

Aerators, digesters, sludge bins & wet wells


0808120846Find-Applicator-Button.jpg

Featured Case Study

Oil & Gas - Containment


bottom